ADDER AdderLink LPV154T Руководство - Страница 11

Просмотреть онлайн или скачать pdf Руководство для Удлинитель ADDER AdderLink LPV154T. ADDER AdderLink LPV154T 18 страниц. Signage video extender

Connections at each receiver module

To connect the link cable and video display

The link from the transmitter to each receiver module is made using a twisted

pair cable, specified to Category 5 or higher at a maximum length of 150 metres

(492 feet).

NOTE: Where possible, avoid laying the twisted pair link cable(s) alongside

power cables.

1 Attach the connector of the link cable to the socket on the receiver module.

There should be a click when the cable is fully inserted and locked in place.

Link cable from the

transmitter module

IMPORTANT: The signals and power connections sent through the link

cables are NOT compatible with standard networking equipment and

could cause damage if connected. Do not connect the transmitter or

receiver modules to any other devices.

AdderLink

LPV150R module

2 Attach the VGA connector of the module to the input socket of the video

display.

No power input is required for the module.

If the video image requires adjustment, please refer to the section

sharpness

adjustment.

VGA input

connector on

video monitor

Video