3onedata ES208G Руководство по быстрой установке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Сетевой маршрутизатор 3onedata ES208G. 3onedata ES208G 2 страницы. Unmanaged ethernet switch
Печатать страницу
Step 1
Check whether the DIN-Rail mounting kit that
comes with the device is installed firmly.
Step 2
Insert the bottom of DIN-Rail mounting kit (one side
with spring support) into DIN-Rail, and then insert
the top into DIN-Rail.
Tips:
Insert a little to the bottom, lift upward and then insert
to the top.
Step 3
Check and confirm the product is firmly installed on
DIN-Rail, and then mounting ends.
【Disassembling DIN-Rail】
Step 1
Power off the device.
Step 2
After lift the device upward slightly, first shift out the
top of DIN-Rail mounting kit, and then shift out the
bottom of DIN-Rail, disassembling ends.
Attention before powering on:
Power ON operation: first connect power line to the
connection terminal of device power supply, and then
power on.
Power OFF operation: first unpin the power plug, and
then remove the power line, please note the operation
order above.
【Power Supply Connection】
DC power supply
The device provides 3 pins 7.62mm
pitch terminal blocks. The power
supply
supports
anti-reverse
normally operate after reverse connection. Power supply
range: 12～48VDC
【Checking LED Indicator】
The function of each LED is described in the table as below:
LED
Status
Description
PWR is connected and running
ON
PWR
normally
OFF
PWR is disconnected and running
Link/Act
(G1-G8)
【Specification】
Panel
Gigabit copper port
Indicator
Exchange attributes
Backplane bandwidth
Packet buffer size
MAC table size
Power supply
Input power supply
Access terminal
Consumption
No-load
Full-load
nonpolarity
and
Environmental Limits
connection.
It
can
Working temperature
Storage temperature
Working humidity
Protection grade
abnormally.
ON
Ethernet port connection is active.
Blinking
Data transmitted
OFF
Ethernet port connection is inactive.
10/100/1000Base-T(X)
self-adapting RJ45 port, full/half
duplex self-adaption, support
MDI/MDI-X self-adaption
Power indicator, interface
indicator
20G
2.5Mbit
8K
12~48VDC
Support nonpolarity and
anti-reverse connection
Support built-in overcurrent 4.0A
protection
3 pins 7.62mm pitch terminal
blocks
0.82W@24VDC
3.65W@24VDC
-25℃~70℃
-40℃~85℃
5%~95% (no condensation)
IP40 (metal shell)