Duco DucoBox Focus Руководство по установке - Страница 11
Просмотреть онлайн или скачать pdf Руководство по установке для Контроллер Duco DucoBox Focus. Duco DucoBox Focus 16 страниц.
Также для Duco DucoBox Focus: Руководство пользователя (2 страниц), Руководство по установке (20 страниц), Быстрый старт (4 страниц)
Печатать страницу
06.D Removing / replacing components
Removing paired components from the network or replacing is only possible within 30 minutes after the component is paired in
or is restarted� Restarting can be done by disconnecting the power for a moment� After a time-span of 30 minutes, remove and
replace operations are ignored� This is valid for all components from date of manufacture 170323�
Removing a component
Activate 'Installer mode' by
long-pressing 2 diagonal buttons
1
on a paired control� The LED will
flash green or yellow rapidly�
Press once and hold a button on
the component to be removed
in order to remove it from the
2
network� ATTENTION: any under-
lying components will also be
removed from the network.
Deactivate 'Installer mode' by
pressing the 4 buttons on a paired
control simultaneously (or using
3
the palm of your hand on a control
featuring touch buttons)� The LED
will turn white�
06.E Tips
• Removing all components from the network (e.g. in the event of problems): Activate 'Installer mode' and long-press 'INST'
until the LED starts flashing red� The DucoBox will reboot and the LED will stop flashing�
• Restoring factory settings for the DucoBox and all paired components (AS FROM DucoBox version 18xxxx): Long-press 'INST'
and 'ENTER' if not in 'Installer mode'� The network remains in place�
• Use the Duco Network Tool to read out information from components�
Replacing a component
Activate 'Installer mode' by
long-pressing 2 diagonal buttons
1
on a paired control� The LED will
flash green or yellow rapidly�
5 sec
Briefly press twice on the button
2
of the component to be replaced�
5 sec
Tap once on the button of the new
component� The latter will take on
3
all settings / connections in the
network�
Deactivate 'Installer mode' by
pressing the 4 buttons on a paired
control simultaneously (or using
3
the palm of your hand on a control
featuring touch buttons)� The LED
will turn white�
L2000631 Installation guide for DucoBox Focus (Revision L | 06.09.2022)
ENGLISH
5 sec
OLD
2x
NEW
1x
11