ANYTEC 868 CAB Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Лодка ANYTEC 868 CAB. ANYTEC 868 CAB 16 страниц.

Manual Anytec 868 CAB

We recommend raising the boat in August in order to wash down the bottom and remove any

fouling so as to maintain the performance of your boat. Your boat may lose up to 10% of its

normal performance in terms of speed, which also means an increase in fuel consumption.

O- Always consider the environment

V – Regular checkups

Anytec recommends that you at least once a month go through below points, make a habit to

lift the engine hood/cover regularly. It only takes a few minutes but can give you some nice

extra days at sea.

 Fuel lines and their connections

 Hydraulic lines with connections

 Batteries, water level & lugs

 Oil levels engine/gearbox

 Safety equipment

 Bilge Pumps

 Steering control

1.9 Winter layup

For winter layup of engine, check the engine manual.

 Wash your boat both inside and outside.

 Remove all equipment, tools, etc. from your boat

 Remove the battery, charge it and store it in a dry, ventilated area which is free from

frost (O), if the battery is left in the boat, remove the cables from the terminals.

 Lubricate the control equipment (O).

 Unscrew the boat's drain plug (bottom plug)

 Drain all water out of your boat and protect it from precipitation (O).

 Always replace worn components (W) such as sacrificial anodes (also applicable to

the engine)

 Remove cushions and other textiles that may turn mouldy.

 Ensure that there is good ventilation

1.9.1 Trailer transport (W)

Check that the centre rollers are bearing the weight of the keel correctly, and adjust the side

supports so that they prevent all lateral movement. Do not forget to secure your boat using

tensioning belts. Do not load items / equipment into the boat when it is being transported on a

trailer.

Anytec Sweden AB

Magasinsgatan 7

903 27 UMEÅ

0770-220 210

https://www.boat-manuals.com/

2017 (REV A)

- 7 -