Airvana AV200HUM Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Увлажнить Airvana AV200HUM. Airvana AV200HUM 17 страниц. Ultrasonic humidifier

Remote Control

Using the Remote:

Your remote comes with a battery installed and

does not need to be programmed. Before using

your remote for the first time, you must take out the

pull tab. To use remote, make sure to point it at the

front of the unit. The remote will not work when

pointed to the backside of the unit.

Sleep Mode:

display lights and run the humidifier on low

mist. Press again to turn off sleep mode.

Humidity Level:

40%-75% RH (relative humidity). Press the + to increase the

desired humidity by 5% each time button is pressed. Press

the - to decrease the desired humidity by 5% each time

button is pressed. Once desired humidity level displays, the

humidity will blink four times to signal humidity level is set.

Accent Light:

are seven colors to choose from. Press through the options

to turn off the accent light.

Timer:

Timer can be set between 1 - 12 hours. Press the + to

increase the timer by 1 hour each time button is pressed.

Press the - to decrease the timer by 1 hour each time button

is pressed. By default timer will start at "CO" for continuous.

Once desired timer displays, the timer will blink four times to

signal timer is set.

Mist Output:

speed and three times for high speed.

Power Button:

Press once to turn off the

Humidity can be adjusted between

Press once to turn on the accent light. There

Press once for low speed, twice for medium

Press button to power humidifier on or off.