AnyTone AT-5555 PLUS Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Радио AnyTone AT-5555 PLUS. AnyTone AT-5555 PLUS 17 страниц. 10 meter radio
Печатать страницу
FUNCTIONS & FEATURES
1. Large
LCD
panel
which displays frequency and all kinds of
information
2. DUAL-DIGITAL TUBE FOR CHANNEL DISPLAY
3. USE EL technology for backlight
4. PA、CW、AM、FM、USB、LSB mode
5. A、B、C、D、E、F , 6
can be individually
programmed.
6. Frequency Tuning Step can be 10HZ, 100HZ, 1KHZ or 10KHZ.
7. Multiple CLARIFIER Operating Modes
8. Flexible menu functions and PC programming software to meet
varied customer demands
9. ECHO Function
10. SQ, ASQ Function (FM and AM mode only)
11. RF GAIN ADJUSTMENT
1
12. RF PWR ADJUSTMENT
13. SCAN FUNCTION
14. RB FUNCTION
15. NB/ANL FUNCTION
16. DW DUAL-WATCH FUNCTION
17. BEEP VOICE PROMPT
18. +10KHZ Function
19. SWR、S/RF、DC Voltage display function
20. TOT function
21. HI-CUT FUNCTION
22. EMG CALL
23. SWR PROTECTION
24. POWER SUPPLIED VOLTAGE PROTACTION
banks in total, where 60 channels at least
25. Key-Lock Function
26. VOX function
27. CTCSS/DCS code
28. RX compander: noise blanker
29. Noise gate setting: mic noise adjustable
30. RX Noise Reduction (only AT-5555PLUS/N)
31. Compatible with "electronic" and "dynamic" MIC type
WARNING
To use the radio, please connect the antenna to the
panel of the equipment firstly and then
Wave Ratio) before transmitting (at this subject read the chapter nr.5/
page 3). A badly tuned antenna can destroy the final TX amplifier, these
components are NOT covered under warranty.
RESET FUNCTION (Resume Factory Default)
This Radio offers the RESET FUNCTION to prevent and solve
upgrading, as well as provides a solution for customers who changed or
activated unconsciously some unwanted function: the resuming of the
original "factory setting" is easy and instantly.
How to Operate:
Step 1: Power off the radio.
Step 2: Press and hold FUNC and SCAN keys at the same time,
followed by powering on the radio.
Step3: Release the two keys when LCD displays "RES".
All former settings would be replaced by Factory Default value when
LCD displays "REND" .
WARNING: All former settings would be replaced by Factory Default
value after operating the RESET FUNCTION.
INSTALLATION
jack
"B" on the back
measure
the SWR (Standing
accidental