AnyTone AT888 Руководство пользователя - Страница 13

Просмотреть онлайн или скачать pdf Руководство пользователя для Радио AnyTone AT888. AnyTone AT888 20 страниц.

Basic Operations

The speaker is built in microphone, only connect

microphone to hear someone talking.

When the transceiver RX indicator light up, but can not

hearing transmit party calling, it refers current channel

receive match carrier but different signal.

TRANSMITING PILOT FREQUENCY

In standby state, press PTT key then pres [DN] key to

transmit pilot frequency.

Pilot frequency should setup by program software.

TRAN 2TONE,5TONE,DTMF

In standby state, hold PTT key and [UP] key to transmit

2TONE,5TONE or DTMF signal, When the channel optional

signal set to 2TONE, this operation can transmit the preset

2TONE signal. When the channel optional signal set to 5TONE,

this operation can transmit the preset 5TONE signal. When

the channel optional signal set to DTMF or none setting, this

operation can transmit the preset DTMF signal.

Restore Factory Setting

If the transceiver can not normal use since program error,

you can restore to factory setting through this function.

In power off state, press [UP] key to power on, then all

channel and functions restore to factory setting.