DUCTMATE Ultimate Door II Инструкции по установке
Просмотреть онлайн или скачать pdf Инструкции по установке для Сварочные принадлежности DUCTMATE Ultimate Door II. DUCTMATE Ultimate Door II 2 страницы.
Печатать страницуD E S C R I P T I O N
Weld on style access door for grease duct or high
temperature applications.
B A S I C U S E
To provide easy access into high temperature air ducts
and grease duct systems. This door was designed for
applications requiring UL 1978 Listing.
S P E C I A L C H A R A C T E R I S T I C S
•
UL 1978 Listed
•
Available with optional hinge
•
No special tools to remove
•
Minimal penetration into the duct
•
Dramatically reduces installation time
•
Grease and air tight
•
Meets NFPA 96 Standards
•
Union made in the U.S.A.
•
Available in a variety of sizes
•
Can be used with all types of duct wrap insulation systems
•
No need for any clips
•
No need for any drilling
•
Unique collapsible handle design for easy installation
•
Top plate is completely removable for easy cleaning
T E C H N I C A L I N F O R M A T I O N
PANELS
The ULtimate II WELD ON access door consists of two
layers of 11 gauge steel (also available in stainless 304).
Steel door must be used on steel duct and stainless door
must be used on stainless duct.
GASKET
High temperature ceramic board, rated to 2300°.
FASTENERS
Zinc plated fasteners.
TEMPLATE
Self adhesive template is provided for the exact size of duct
opening required.
UL DOOR INSULATION OUTER PLATE
Manufactured from 16 gauge black iron. For us with a
wrap system. (Sold separately or as a kit)
UL DOOR INSULATION HARDWARE
Consists of four 8" extension studs, washers, fasteners, "Do
Not Obstruct" Sticker, and installation instructions.
(Sold separately or as a kit)
I N S T A L L A T I O N I N S T R U C T I O N S
1. Peel backing off template
and apply to duct in
desired location.
2. Cut around edge of
the template.
3. Remove the fasteners
and separate door
from frame.
4. Center the frame
around the opening.
5. Attach with tack welds
2" apart.
6. Correctly installed frame.
7. Install the fasteners with
washers. For hinged
door, position hinge on
duct wall and plug weld.
* If using the frame on
the outside of the duct,
a continuous liquid
tight weld is required.
Care should be taken to
not warp the frame
when welding.