Anywave ATSC 560W DTV Краткое руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Передатчик Anywave ATSC 560W DTV. Anywave ATSC 560W DTV 13 страниц.

Печатать страницу
15. For Remote TX Monitoring and Control, you may network to the Exciter
REMOTE RJ-45 rear panel connection at 192.168.1.143 – you can change the
exciter ipaddress by navigating to the CONFIG submenu (simultaneously press
Left and Right buttons) and change the value of IP (please reference your
Exciter User Manual for details).
16. If using the Exciter Built-in remote web interface for remote control, please be
sure to set the Exciter to REMOTE mode (set CTL to RMT) before leaving the
transmitter site. The Remote/Local setting is located under the SYSTEM
submenu. Most of the Local TX controls are available on the remote web
interface, including On/Off, Raise/Lower power, etc. (refer to the Exciter user
manual for details).
ACT-560-QSG-DOC-V1.2, 10/10/2014
ATSC 560W TX Quick Start Guide
Page 12 of 13