Duerkopp Adler 251-140042 Руководство - Страница 17
Просмотреть онлайн или скачать pdf Руководство для Швейная машина Duerkopp Adler 251-140042. Duerkopp Adler 251-140042 20 страниц. Auto high speed lockstitch sewing machine
Печатать страницу
27. PEDAL PRESSURE AND PEDAL STROKE
WARNING:
To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine
and check to be sure that the motor has totally stopped rotating in prior.
28. ADJUSTMENT OF THE PEDAL
WARNING:
To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine
and check to be sure that the motor has totally stopped rotating in prior.
(1) Adjusting the pressure required to
depress the front part of the pedal
1)
This pressure can be changed by changing the mounting
position of pedaling pressure adjust spring
2)
The pressure decreases when you hook the spring on
the left side.
3)
The pressure increases when you hook the spring on the
right side.
(2) Adjusting the pressure required to
depress the back part of the pedal
1) This pressure can be adjusted using regulator
screw
2
.
2) The pressure increases as you turn the regulator
screw in.
3) The pressure decreases as you turn the screw out.
(3) Adjusting the pedal stroke
1)The pedal stroke increases when you insert
connecting rod
2)The pedal stroke decreases when you insert
connecting rod
(1) Installing the connecting rod
(1) Installing the connecting rod
1)
1)
Move pedal
Move pedal 3 to the right or left as illustrated by the
3
to the right or left as illustrated by the
arrow so that motor control lever 1 and connecting
arrow so that motor control lever
rod 2 are straightened.
rod
2
are straightened.
(2) Adjusting the pedal angle
(2) Adjusting the pedal angle
1)
1)
The pedal tilt can be freely adjusted by changing the
The pedal tilt can be freely adjusted by changing the
length of the connecting rod.
length of the connecting rod.
2)
2)
Loosen adjust screw 4 , and adjust the length of
Loosen adjust screw
connecting rod 5 .
connecting rod
5
.
-12-
3
into the right hole.
3
into the left hole
1
and connecting
4
, and adjust the length of
1
.