Duerkopp Adler 506-3 Руководство по установке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке для Швейная машина Duerkopp Adler 506-3. Duerkopp Adler 506-3 12 страниц.

4. Pneumatic Connection

For the operation of the clamp lifting, thread tension opening, needle

cooling, etc. the unit must be supplied with water-free compressed air.

ATTENTION !

For a flawless functioning of the pneumatic control processes the

compressed air supply must be laid out as follows:

Even at the instant of greatest air consumption the minimum operating

pressure may not fall below 5 bar.

Connecting the compressed air maintenance unit

–

Connect the connection hose 3 for the maintenance unit to the

compressed air supply with the enclosed coupling.

Setting the operating pressure

The operating pressure is 6 bar.

–

It can be seen on the pressure gauge 2.

–

For setting the operating pressure pull knob 1 up and turn.

Turning clockwise

Turning counterclockwise

= Increase pressure

= Decrease pressure