Anzzi CS-CTRTP00MW Руководство по установке и эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Сантехника Anzzi CS-CTRTP00MW. Anzzi CS-CTRTP00MW 5 страниц. Console sink

Печатать страницу

Section 1

1.Place the stand upright in the desired location

and level using the height adjusters built into the

bottom of the legs.

2.Use a pencil and the pre-drilled holes in the st-

and frame to mark location of mounting hardware

on wall.

3.Drill holes for mounting hardware in the wall.

4.Insert anchors into the holes and secure the

stand to the wall with the screws.

5.Apply silicone adhesive to the frame of the low-

er shelf and then place the glass plate on the fra-

me.

NOTE: Silicone adhesive and tools necessary for installation are NOT included.

3pcs

drilling holes Φ3/8" (8mm)

Section 2

1.Apply a thin coat of silicone adhesive to the back

of the sink where it meets the wall.

2.Apply a thin coat of silicone adhesive to the sta-

nd's top frame where the sink will rest.

3.Carefully place the sink on the top frame of the

stand and center it.

4.Allow silicone adhesive to dry for 24 hours.

3pcs