Duerkopp Adler N291 Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Швейная машина Duerkopp Adler N291. Duerkopp Adler N291 12 страниц.
Также для Duerkopp Adler N291: Руководство по установке (9 страниц)

Печатать страницу

Duerkopp Adler N291 Руководство по эксплуатации

2.2 Elements at the stand

Elements

Main switch 2

Pedal 3

Idle position

Position "half back"

Position "completely

back"

Positions "in front"

Knee switch 1

Maintenance unit

Air filter and water

separator 8

Pressure regulator 9

Mist lubricator 6

function

–

Turning on and off the machine.

–

No function.

–

Lifting the foot at machine standstill.

–

Activating the thread trimmer and lifting the foot.

–

Sewing at the desired speed.

–

This key has the same function as the key 14

(page 9) of the key block:

Activating a higher foot stroke.

–

The operating mode

"Activation as long as the key is being operated"

"Activation until the key is being re-operated"

"Activation as long as the key is being operated and

until all input stitches are sewn"

depends on the input at the control panel.

–

Before the water level reaches the filter, turn in the

drain screw 7 accordingly. While doing so, do not

interrupt the supply of compressed air.

–

To adjust 6 bar pull up the sleeve 10 and turn it

accordingly.

–

Adjust approx. 1 drop for 10 work cycles using the

set screw 4.

To refill, vent the pneumatic system, turn out the

screw 5 and refill the oil ESSO "SP NK 10" up to the

"groove".