Cascade C Series Руководство по установке - Страница 9
Просмотреть онлайн или скачать pdf Руководство по установке для Промышленное оборудование Cascade C Series. Cascade C Series 10 страниц. Weigh forks
Также для Cascade C Series: Карманное руководство оператора (2 страниц)
Печатать страницу
P
ERIODIC MAINTENANCE
WARNING: After completing any service
procedure, always test each function
through five complete cycles. First test
with no load, then test with a load to
make sure the attachment operates
correctly before returning it to the job.
100-Hour Maintenance
Every time the lift truck is serviced or every 100 hours of
truck operation, whichever comes first, complete the
following maintenance procedures on the Fork Positioner:
• Check for loose or missing bolts, worn or damaged
hoses and hydraulic leaks.
500-Hour Maintenance
After each 500 hours of truck operation, in addition to the
100-hour maintenance, perform the following procedures.
• Tighten lower hook capscrews to:
Class II, III Mounting – 120 ft.-lbs. (165 Nm)
Class IV Mounting – 190 ft.-lbs. (255 Nm)
• Apply chassis grease to fork bearing grease fittings.
• Apply chassis grease to fork cylinder rod anchors.
• Apply chassis grease to sideshifter (if equipped) upper
bearing grease fittings and lower flat bearings.
1000-Hour Maintenance
After each 1000 hours of truck operation, in addition to the
100 and 500-hour maintenance, perform the following
procedures.
• Inspect fork bearings for wear and replace if necessary.
• Inspect fork cylinder rod anchors for wear and replace
if necessary.
• Inspect sideshifter (if equipped) upper and lower
bearings for wear and replace if necessary.
Sideshifter
Lower Bearings (2)
Back (Driver's) View
Fork Bearing
Grease Fittings (4)
Fork
Bearings (4)
Front View
FP0215.ill
Lower Mounting Hook
Capscrews (4)
Sideshifter Upper Bearing
Grease Fittings (2).
(sideshift to expose fittings.)
FP0201.ill
Cylinder Rod
Anchors (2)
7