Cascade KB-123E Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Железо Cascade KB-123E. Cascade KB-123E 8 страниц.

Steam Ironing

1. Fill the iron as described in the section "how to fill the water tank".

2. Plug the iron into the mains.

3. Steam ironing is only possible when the highest temperatures shown on the

temperature control are selected. Otherwise, water may escape through the

soleplate.

4. Turn the steam button to the required position.

5. When the ironing is finished and during breaks in ironing, place the iron in its

upright position.

6. Disconnect the iron from the mains supply. Pour of any remaining water and leave

the iron to cool off.

NOTE: This steam iron comes with auto shut off function, the iron will shut off when it

is upright position for 10 minutes or flat position for 30 seconds without moving.

Spray

1. The spray can be used in any position, either in dry or steam ironing, as long as the

water tank is filled with water.

2. Press the spray button for this function

NOTE: This button has to be pressed repetitively to start this function for the first time.

Shot of steam

Shot of steam provides extra steam for removing persistent wrinkles.

1. Place the temperature selector at the "max"(fig.3)position.

2. Wait for a few seconds for the steam to penetrate the fibre before pressing again.

NOTE: For the best steam quality, do not use more than three successive bursts each

time. Several pumping actions are needed to start this function.

Excessive use of this feature will cause the iron to cool, ensure that the pilot light is

out, before operating the shot of steam control.

Defects and repairs

Do not attempt to replace a defective mains lead. The appliance has to be returned to

an authorized service centre for repair.