3onedata IMF204-2F Series Руководство по быстрой установке

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Модем 3onedata IMF204-2F Series. 3onedata IMF204-2F Series 3 страницы. Ring network serial to fiber modem

Печатать страницу
IMF204-2F Series
Ring Network Serial to Fiber MODEM
Quick Installation Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Song Bai Road, Nanshan
District, Shenzhen, 518108, China
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the device for the first time.
1
Serial to fiber MODEM
2
3
Lug x2
4
5
Warranty card
6
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The products of this series are industrial unmanaged ring
network serial to fiber MODEM, Models are as follow:
Model I. IMF204-2F-4DI(RS-485)-P(12~48VDC) (2 fiber
interfaces + 4 RS-485 serial ports, 12~48VDC)
Model II. IMF204-2F-4DI(RS-485)-P(100~240VAC) (2 fiber
【Panel Design】
Front View
Rear View
1.
2.
3.
4.
5.
Quick installation guide
6.
Power
line
(
AC
7.
standard feature )
8.
Certification
9.
10.
【Mounting Dimension】
Unit: mm
interfaces + 4 RS-485 serial ports, 100~240VAC)
Model I
Model II
Serial
port
transmitting
and
receiving
indicators
Fiber port connection status indicator
Master/Slave device status indicator
Running status indicator
DIP switch
Console port
Fiber interface
RS-485 serial port
Terminal block of 12~48VDC power supply input
Terminal block of 100~240VAC power supply input
Note before mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
data
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【Wall-mounted Device Mounting】
Step 1
Adopt a M3 screw to install the left/right mounting
board on the device backboard.
Step 2
On the wall of device mounting, place the device on
the wall for reference or refer to the mounting
dimension to mark two screw positions.
Step 3
Attach the equipment to the marked wall and