Addictive audio B450.1 Руководство по эксплуатации и установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Усилитель Addictive audio B450.1. Addictive audio B450.1 15 страниц.

CONGRATULATIONS!

Selecting fine audio equipment, such as the Addictive Audio amplifier you

have just purchased, is only the beginning of your musical enjoyment. Now is the

time to consider how to maximize the fun and excitement your equipment has to

offer. We at Addictive Audio want you to get the most out of your equipment by

playing it at a safe level, a level that lets the sound come through loud and clear

without annoying blaring distortion; most importantly, without affecting your

sensitive hearing.

Sound can be deceiving over time your hearing "comfort level" adapts to

higher volumes of sound, what may have sounded "normal" can actually be too

loud and harmful to your hearing.

Prevent this by setting your equipment at a safe level BEFORE your

hearing adapts.

To establish the "safe level".

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and

without distortion.

• Once you have established a comfortable "sound level" make a note of this

position and do not go above this setting.

Taking a minute to do this will help to prevent hearing damage in the future.

After all, we want you listening for a lifetime.

Introduction

Your Addictive Audio amplifier has been designed to give you very high

performance, and valuable features, at an exceptional value. Take the time to read

over this brief set of instructions, and you will get full enjoyment from your system.

Installation

The quality of the installation will affect system performance and reliability. You

may wish to contact a dealer or professional installer. The amplifier is generally

mounted in the rear trunk area but can be mounted in any convenient area such as

beneath a seat. Please be sure to locate this unit where you have reasonable air

circulation and protection from any moisture.

When considering the mounting location you should minimize the length of the

power supply and speaker leads. Minimizing both leads will provide higher audio

output from the system. It is important to ensure that the heat sink is not against a

panel or a surface preventing air circulation. Mark the location for the mounting

screw holes by using the amplifier as a template. Drill #29 or 9/64" diameter holes

at the marked locations and firmly fasten the amplifier in place with the mounting

screws supplied in the accessory kit.