cascade corporation QFM Push/Pull E Series Инструкции по установке и периодическому обслуживанию - Страница 10
Просмотреть онлайн или скачать pdf Инструкции по установке и периодическому обслуживанию для Вилочные погрузчики cascade corporation QFM Push/Pull E Series. cascade corporation QFM Push/Pull E Series 14 страниц. Quick fork mount
Печатать страницу
I
NSTALLATION
13
Adjust platens (if required)
Platens
NOTE: If required, graphite
coating on platens may be
removed using solvent or
paint remover.
14
Adjust faceplate stop group
(if equipped)
A
Pull outward on stop block and turn to
stop position to be adjusted.
B
Adjust capscrew for faceplate position.
Stop Block,
Adjuster
Capscrews
X
3
X
0
X
X
X
0
1
2
8
Tighten capscrews to:
40 ft.-lbs. (55 Nm)
4 in (100 mm)
OR
10 in. (250 mm)
X
2
X
1
PP0287.eps
PP0288.eps
38 in. (97 cm)
Maximum Setting
X
3
PP2100.eps
Fork
PP0887.eps
Thickness
1.75 in. (44 mm)
1.80 in. (45 mm)
15
Stop
Valve
SHEET-SAV
Spacers
WARNING: Forks thicker than 1.50 in. (38 mm)
require spacers under the platens to allow the
upper mounting hooks to fully engage the upper
carriage bar. Spacer kit applications listed below.
Spacer Kit
Part No.
Thickness
204968
.187 in. (47.5 mm)
201260
.250 in. (63.5 mm)
Purge air from attachment
hydraulic system
A
Extend/Push faceplate.
B
Continue to hold auxiliary valve control
lever open 10 sec. to remove trapped air.
C
Retract faceplate.
D
Repeat for other functions.
C
D
PP0888.eps
™
Spacer
A
D
Gripper
684948-R7