AirVerter AV-096 Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Краскопульт AirVerter AV-096. AirVerter AV-096 12 страниц. Hvlp paint spray system

Печатать страницу

MODEL 96 SPRAY GUN AV-096 TROUBLESHOOTING GUIDE

Trouble

1. Blockage in fluid nozzle

2. Loss of air pressure in cup

3. Loose fluid nozzle

Paint Will Not

Flow

4. Paint tube loose, damaged or

5. Coating is too thick

6. Loose Needle Packing

1. Running out of paint

2. Loose fluid tube

Inconsistent

Spray Pattern

3. Loss of fluid pressure

(Spits and

4. Loose needle packing

Sputters)

5. Damaged air pressure tube

1. Damaged fluid needle

2. Wrong size fluid needle

3. Dirty fluid nozzle

4. Impurities in paint

Leakage at

5. Loose fluid nozzle

Front of Gun

6. Fluid adjustment screwed all the

7. Needle not firmly seated in the

8. Packing too tight

1. Dirty or damaged air cap

2. Dirty or damaged fluid nozzle or

Distorted Spray

3. Fluid nozzle partially clogged

Pattern

4. Fluid nozzle not centered with air

5. Air Cap not seated correctly

DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUIPMENT

AirVerter

Model 96 HVLP Paint Spray System

Probable Cause

clogged

way out

nozzle

needle

cap

Remedy

1. Clean or replace; strain paint

2. Search for air leaks and check cup

gasket

3. Tighten

4. Tighten, replace or clean; strain paint

5. Thin the coating

6. Adjust packing

1. Fill cup or pot, but never the top ¼

2. Tighten

3. Search for air leaks or blockages

4. Adjust packing

5. Air pressure tube requires replacing or

close inspection

1. Replace

2. Replace

3. Clean

4. Strain paint

5. Tighten

6. Rotate Fluid Control Knob (DT-012) on

rear of gun clockwise

7. Check for nozzle obstruction

8. Loosen and adjust to correct tension

1. Clean or replace

2. Clean or replace

3. Clean

4. Replace air cap

5. Re-seat air cap