Dukane 43Q220-P-301 Инструкция по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Сварочная система Dukane 43Q220-P-301. Dukane 43Q220-P-301 4 страницы. Thruster from a plc ultrasonic welders

Печатать страницу

DUKANE

CONNECTING A 43Q220-P-301 THRUSTER TO A PLC

The cable is provided with a connector on both ends. If desired cut the connector from one end to expose the individual

wires. Below are the pins used for thruster control. At minimum only 4 connections are needed. The Top of Stroke,

Trigger and Dual Pressure Valve connections are optional if additional functionality is desired.

It is recommended that an E-stop be inserted between the 24 volt power supply and the cable connection. This will turn

both valves off, allowing the thruster to go to a neutral state. The 24 volt power supply should be capable of supplying

0.5 amps or more.

AN532 (Rev. 00)

Page 2 of 5

Thruster Cable part number: 200-1413

Wire Color

BLK/RED

BLK/GRN

BLK/BLU

BRN/BLK

ORN/BLK

BLU/RED

YEL/RED

GRN/RED

APPLICATION NOTE AN532

Pin no#

Top of Stroke (relative to GND)

Dual Pressure Valve

Function

22 Volts

Up Valve

Down Valve

Trigger

Trigger return

GND