3rd Power CLEAN SINK MKII Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель для музыкальных инструментов 3rd Power CLEAN SINK MKII. 3rd Power CLEAN SINK MKII 12 страниц.

Печатать страницу

Back Panel:

AC Fused Input (1)

The AC FUSED INPUT socket (TYPE IEC Grounded) is a required connection for operating your CLEAN

SINK MKII at 120V (standard USA household electrical power). The MAINS FUSE requires a 1.25 AMP

slow blow fuse. This fuse protects your ampliﬁer from voltage peaks from your power outlet.

H.T. Fuse (2)

The H.T. FUSE requires a 0.25 AMP (250 milliamp) slow-blow fuse. The H.T. FUSE usually blows if your

power tubes are bad to protect the circuit from being damaged.

SAFETY NOTES:

• Always plug your amp into a properly grounded 3 prong AC outlet.

• Never plug your amp into an ungrounded outlet.

• Never remove or break off the 3rd prong safety ground pin from the power cord.

• Never use a damaged or ungrounded power cord.

• Always use the proper value and type fuse according to the rear-panel markings.

• Never attempt to replace the fuse while the ampliﬁer is still plugged into the power source. The

fuse should only be replaced when the power cord has been disconnected from its power source.