Dultmeier Sales DUFB_A-D Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Стиральная машина Dultmeier Sales DUFB_A-D. Dultmeier Sales DUFB_A-D 12 страниц. Air pump foam brush system - demand

Печатать страницу

Chemical Set Up

1. Select proper mix tip (provided) for soap and set

aside for future installation.

Consult Hydrominder instructions and chemical

product label for further dilution information.

2. Attach chemical suction tube to inlet port on

eductor and place other end with foot valve

strainer and weight into bulk soap container.

3. Attach discharge tube assembly with orifice side

up to eductor outlet. (Fig. 7)

4. Run beaded chain on float assembly through

eyelet of yoke. (Approx. 6" of chain) (Fig. 7-A)

Purging Air out of the Chemical Suction Tube

5. Turn the water on slowly until the chemical

suction tube fills with soap.

6. Remove the chemical suction tube.

7. Now, install the mixing tip set aside earlier.

8. Reinstall the chemical suction tube.

9. Fill tank to 2/3 capacity. The level is set by

changing the length of the beaded chain on the

float assembly. (Fig. 7)

Chemical Adjustment Notes

Installation & Operating Instructions | 5

Chemical

Suction

Tube

Discharge Tube

Assembly

Figure 7

Purging Air out of the Chemical Suction Tube

After the air is purged, remove any water

left in the tank or add a higher concentrate of

chemical to adjust for the water level.

This will ensure you get a more consistent foam.

Eductor

Inlet Port

Tip

Float

Assembly

Helpful Hint !