Dulux PaintPod Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Краскопульт Dulux PaintPod. Dulux PaintPod 18 страниц. Roller system
Печатать страницу
usiNg YOur PAINTPOD
seTTiNg uP
Always set up the PaintPod in the room to be painted.
Lift the lid release of the white chamber and remove the contents.
a
Plug mains power lead into power
supply unit. Connect one end
of the power lead to power lead
input on the PaintPod and the
other to a mains socket. The lights
on the PaintPod will 'flash' twice
and make a noise to show it is
connected to the mains
power supply.
IMPORTANT:
If dip tube hole on the paint pack is NOT facing the front of the white chamber the paint pack
warning light will illuminate when the 'paint' button is pressed and the PaintPod will not operate. If this
happens, lift lid and re-insert paint pack in the correct position.
d
Fold down paint pack handle and
close the white chamber lid.
IMPORTANT:
Check paint pack
warning light is NOT illuminated
then lift dip tube cover and fully
insert dip tube into PaintPod.
b
for wall and ceilings
splatter free
for wall and ceilings
Gently shake the paint pack
(not supplied) for approximately
10 seconds before unscrewing
the lid.
Peel off the foil seal.
e
Twist dip tube clockwise to lock
and 'click' into position. Ensure
dip tube is locked correctly
otherwise pump will not work
Close dip tube cover.
5
c
ultra smooth finish
Lift lid release of white chamber
and place paint pack inside.
Ensure paint pack is facing the
right direction – the dip tube hole
on the paint pack must face the
front of the white chamber.
f
When ready to paint
Press 'paint' button. The blue light
will illuminate.
Dip
tube
hole
White
Chamber