CashConcepts CCE 5060 Руководство - Страница 11

Просмотреть онлайн или скачать pdf Руководство для Кассовый аппарат CashConcepts CCE 5060. CashConcepts CCE 5060 14 страниц.

CashConcepts CCE 5060 Руководство
CCE - Cash Concepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.gmbh

Mechanical settings

Due to transport and wear of the transport rollers in the hopper area, it may be necessary to readjust the banknote feed. On the
upper side of the machine there is an adjusting screw with which the pressure on the banknotes can be changed.
If the CCE 5060 draws in not only one but also several banknotes, please turn the adjusting screw in the direction of the "-" area
using a screwdriver.
If the banknotes are drawn into the machine badly or at an angle, please turn the adjusting wheel with the aid of a screwdriver in
the direction of the "+" area.
Error management and maintenance
The CCE 5060 is equipped with a comprehensive fault management system to inform you of problems with money processing and
counterfeit detection, but also to alert you to sensor contamination. Please pay particular attention to the instructions below for
cleaning the machine in order to exclude errors caused by contaminated sensors and to achieve optimum results when counting
banknotes.
Cleaning the sensors
The banknotes and the settling dust cause deposits in front of the machine's sensors. These impurities lead to increased rejections
and non-recognition of genuine banknotes.
Therefore, please clean the sensors of the CCE 5060 at regular intervals. When cleaning the machine, generally switch off the
device and disconnect the mains plug.
To clean the sensors, reach into the banknote feed area and open it upwards with both hands. You now have access to the upper
and lower sensor banks.
Using a soft brush and cloth, you can remove the coarse dust deposits from the hopper and stacker area sensors and from the
banknote conveyor wheels. For cleaning the counterfeit money sensors, we recommend the additional use of a non-flammable
compressed air spray or special cleaning cloths for banknote counting machines in order to remove dirt and fine dust even in
inaccessible places.
Also clean the area accessible via the rear flap. To do this, reach into the grip on the back and pull it towards you.
EN
Page 11