CashConcepts CCE 1810 Cash & Card Руководство - Страница 13
Просмотреть онлайн или скачать pdf Руководство для Валидатор банкнот CashConcepts CCE 1810 Cash & Card. CashConcepts CCE 1810 Cash & Card 14 страниц.
Также для CashConcepts CCE 1810 Cash & Card: Краткое руководство (2 страниц)
Печатать страницу
CCE – Cash Concepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.gmbh
Installation of the optional rechargeable battery
Installation of the optional rechargeable battery
If you have opted for an optional battery to operate the CCE 1810 Cash &
Card also mobile, please proceed as follows to install the battery.
1
Open the battery cover on the bottom of the device.
2
Connect the battery cable to the connector. Due to the shape of the
connector fitting direction is given.
3
Insert the battery as shown in the image in the designated mould and
make sure that the cables are not pinched.
4
Now close the battery compartment and plug the power adapter into
the unit to charge the battery. For the first charge, the device can take
up to 12 hours.
5
In the upper right corner of the display you will see the charge icon of
the battery. Is no bar in the battery icon visible and does the icon flash,
the battery needs to be recharged.
Please note the legal regulations for disposal of batteries. For more
information visit our website www.cce.gmbh
Cleaning and Maintenance
Cleaning the sensors
Through the banknotes and settling dust deposits will occur on the sensors
of the machine. These leads to increased non-detections of genuine
banknotes.
Therefore clean periodically the sensors of CCE 1810 Cash & Card. Turn off
the machine when cleaning the unit in general and unplug the power
supply.
1
Reach into the input shaft of the unit and lift it up.
2
With a soft brush and cleaning cloth you can clean the sensors (see
arrows in the picture) and remove the dirt from the transport belts.
3
By using special cleaning towels you can maintain the sensors optimal.
EN