AOM K90 Руководство по эксплуатации и техническому обслуживанию - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Краскопульт AOM K90. AOM K90 16 страниц. Airless gun

USE AND MAINTENANCE MANUAL

3.5 SAFETY PROCEDURES DURING USE

TO USE the painting unit

STRICTLY OBSERVE

ASTURO ORIGINALI MAVES Spa declines every responsibility whatsoever in case the

user does not observe said precautions and safety criteria; furthermore, it is not responsible

for any kind of negligence when using the equipment.

Check the good functioning of the safety devices before working.The hand and the finger

protections must always be mounted on the gun when operating. Always insert the safety

lock placed on the trigger when interrupting the spraying, also for a short time, in order to

avoid an accidental functioning of the gun. TURN THE LOCK COUNTERCLOCKWISE

to insert the trigger safety lock and CLOCKWISE to disconnect it.

HAND PROTECTION 3. Before activating the gun, mount the hand protection correctly

between the sleeve and the gun body (on the upper side) and lock it to the rotating

adapter on the lower side. This safety device hinders the accidental functioning of the

gun in case it is hit or falls down.

FINGER PROTECTION 2. Always mount the finger protection on the gun in order to

avoid putting your fingers or other part of the body accidentally in front of the gun. The

finger protection must always be mounted with its packing. IF THE NOZZLE CLOGS

UP, INSERT THE TRIGGER SAFETY LOCK IMMEDIATELY. BEFORE REMOVING

MATERIAL RESIDUES AROUND THE NOZZLE, COMPLETELY DISCHARGE THE

PRESSURE IN THE SYSTEM.

An improper use of the equipment and its components can cause serious injuries.

Carefully read the technical features described in this manual and never exceed the

pressure values given. Do not use worn-out or defective components, but only ASTURO

ORIGINALI MAVES spare parts. Do not use the equipment other than originally designed.

Carefully check the components and replace those worn-out or defective. The high

working pressure can cause serious injections of toxic substances into the body.

IMPORTANT: Injections must be treated by qualified medical staff as soon as possible.

Inform the doctor of the paint and thinner types used.

HIGH pressure paint circulates in the hoses. Pay attention to breaks, cuts or slight leaks

which can cause injections into the skin or other serious injuries. Always use high pressure

hoses, check the connections before starting up the system, do not bend hoses near

fittings and do not use damaged or worn-out hoses, do not attempt to repair eventual

leaks. The paint flowing in the hose at a high speed causes static electricity: always

check that the system is grounded.

the following precautions and safety criteria.

WARNING

Page 11 of 14