Aonvision Technology ACB336 Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Приемник Aonvision Technology ACB336. Aonvision Technology ACB336 14 страниц. Atsc receiver box
Печатать страницуChapter 2 Cable Connection and First Power On
1. Connect antenna or cable RF output to box "ANT IN" F-connector.
2. If EIA-909 smart antenna is connected, use RJ-11 cable to connect
antenna control box and "SMART ANTENNA" jack in the box.
3. If TV supports composite AV only, use attached YPbPr cable (Green
plug) to connect TV AV IN (yellow jack) and box "Y" (Green jack).
4. Switch the "OUT SELECT" slide switch to the right side (near HDMI
jack).
5. Go to step 12 to continue audio connection.
6. If TV supports HDMI interface, use HDMI cable (not included) to
connect TV HDMI IN jack and box "HDMI" jack.
7. Switch the "OUT SELECT" slide switch to left side (near DIAG jack).
8. Go to step 12 to continue audio connection.
9. If TV supports component YPbPr video, use included component cable
(Green, Blue, Red plug) to connect TV YPbPr IN (Green, Blue, Red
jack) and box "YPbPr" (Green, Blue, Red jack) at the rear cover.
10. Switch the "OUT SELECT" slide switch to center position.
11. Go to step 12 to continue audio connection.
12. Use included audio cable (White, Red plug and 3.5" phone plug) to
connect box "AUDIO" jack and TV AUDIO IN. White plug is for TV
White jack (left channel) and Red plug is for TV Red jack (right
channel).
13. Now, you can turn on the power by plug in the power adapter to box
and wall power socket.
14. When DC power is applied, Red LED will be on at front panel. Use
remote POWER key to turn on box, Green LED will be on and wait for
20 sec to finish boot up. A Start Scan menu will be displayed and you
can select signal source from Air or Cable (STD, HRC and IRC).
Please check local cable operator to learn which cable frequency plan
in your area.
2
ACB336 User Manual