Casio 2128 Общее руководство

Просмотреть онлайн или скачать pdf Общее руководство для Смотреть Casio 2128. Casio 2128 2 страницы.
Также для Casio 2128: Общее руководство (2 страниц)

Печатать страницу

Module No. 2128

• Press C C C C C to change from mode to mode.

• In any mode (except when making settings) press L L L L L to illuminate the display for about 1.5 seconds.

Timekeeping Mode

TIMEKEEPING MODE

• Press B B B B B to switch the display as shown below.

Time and Date

AM/PM indicator

Hour : Minutes

(

AM: not flashing

)

Seconds

PM: flashing

Day

Day of week

• The display type you select is used until you change it.

To set the time and date

1. While in the Timekeeping Mode, hold down A A A A A until the seconds digits flash on the

display.

2. Press C C C C C to change the selection (flashing) in the following sequence.

Seconds

DST

Day

Month

3. While the seconds setting is selected (flashing), press B B B B B to reset it to 00. If you

press B B B B B while the seconds setting is in the range of 30 to 59, the seconds are reset

to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to

29, the minutes count is unchanged.

• While the DST (Daylight Saving Time) setting is select-

• While the 12/24-hour format setting is selected, press

B B B B B to toggle it between 12 and 24.

• While any other setting (besides seconds) is selected

• Holding down either button changes the setting at high

speed.

4. After you set the time and date, press A A A A A to return to the

• The day of the week is automatically set in accordance

DST on indicator

• The date can be set within the range of January 1, 1995 to December 31, 2039.

• If you do not press any button for a few minutes while a setting is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

• The current time for all other World Time cities are adjusted in accordance with the

Timekeeping Mode settings you make.

ABOUT THE BACKLIGHT

• In any mode (except when making any settings), press L L L L L to illuminate the display

for about 1.5 seconds.

• The backlight of this watch employs an electro-luminescent (EL) light, which loses

its illuminating power after very long term use.

• Frequent use of the backlight shortens the battery life.

• The watch emits an audible sound whenever the display is illuminated. This does

not indicate malfunction of the watch.

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

World Time Mode

Hands (Analog)

Time and pendulum

Minutes

Hour

Pendulum

Seconds

City Code

Hour

Year

12/24-Hour Format

ed, press B B B B B to toggle it on and off.

(flashing), press B B B B B to increase it or L L L L L to decrease it.

Timekeeping Mode.

with the date.

GENERAL GUIDE

Data Bank Mode

The World Time Mode shows the current time in any one of 27 different cities. See

the "CITY CODE TABLE" for information about city codes, time zones, etc.

You cannot use the World Time Mode to change the time setting. The time, city, and

DST (Daylight Saving Time) on/off settings you make in the Timekeeping Mode are

applied to all the World Time cities.

Mode indicator

Minutes

DST on indicator

The Data Bank Mode lets you store up to 30 name and telephone number records.

You can recall data by scrolling it on the display.

You can input up to eight characters for the name and 14 digits for the number. When

the name is longer than five characters or when the phone number is longer than

seven digits, the data automatically scrolls across the display.

The scroll operation continues for about two or three minutes and then stops. To start

scrolling again, press B B B B B .

Mode indicator

• When you enter the Data bank Mode, the initial screen appears first, followed by

the number of empty record areas remaining, and then the data record that was

displayed when you last exited the Data bank Mode.

• If memory is full, the message "FULL" appears in place of the number of empty

record areas. When this happens, you can input more data only if you first delete

records no longer need.

Stopwatch Mode

WORLD TIME MODE

Hour : Minutes Seconds

Month - Day Year

Press A A A A A .

City code

• Press B B B B B to scroll through the city codes. Holding down

B B B B B scrolls at high speed.

• Pressing A A A A A causes the upper part of the screen to tog-

gle between the date and time.

• Holding down A A A A A toggles DST (Daylight Saving Time)

for the displayed city on and off.

DATA BANK MODE

Remaining memories

Number area

Name area

2128-1