Danfoss 140F1037 Руководство по установке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке для Термостат Danfoss 140F1037. Danfoss 140F1037 16 страниц. Electronic thermostat

Печатать страницу
3.
Mount and reassemble the thermostat.
•
Fasten the thermostat to a socket or an exterior
wall box by driving the screws through the holes
in each side of the thermostat.
•
Install the frame and front cover in the reverse
order of disassembly.
4.
Turn on the power supply.
3

Settings

How to change the minimum and maximum floor
temperatures
1.
Remove the adjustment button.
2.
Move the pins to the desired
positions.
3.
Put the adjustment button back
in place.
Note: Please be aware of the following:
•
The floor temperature is measured where the floor
sensor is placed.
•
The temperature of the bottom of a wooden floor can
be up to 10 degrees higher than the top.
10
DEVIreg™ 530
3
2
40
30
50
20
Installation Guide
4
5
6