Danfoss BasicPlus2 WT-DM Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Термостат Danfoss BasicPlus2 WT-DM. Danfoss BasicPlus2 WT-DM 4 страницы. Room thermostats for floor heating
Также для Danfoss BasicPlus2 WT-DM: Руководство по установке (11 страниц)
User Guide
7
Set Control Parameters
Press M button for 6 seconds to enter the parameter setting mode. Press M for parameter selection and set the
parameter range via < or >. The upper digits indicate the parameter number. Complete all adjustments.
To exit the parameter setting mode, wait for automatic exit (30 seconds).
The digits indicate the set value as follows:
No.
Parameter settings
Working mode
P01
(Will not show on the display)
P02
Temperature control mode
P03
High room temp. limit
P04
Low room temp. limit
P05
Floor temp. limitation mode
P06
Floor temp. limitation setpoint
P07
High floor temp. limit
P08
Low floor temp. limit
P09
Frost protection
P10
Frost protection setpoint
Timer display option
P11
(Will not show on the display)
Room temp. display option at
P12
shutdown
P13
MODBUS slave address
P14
MODBUS baud rate
P15
MODBUS parity check
P03 to P08 appear on relevant temperature control mode.
8
Error Messages
E1
Room sensor failure
E2
Floor sensor failure
EE
EEPROM failure
Lo
Temperature lower than 0° C
Hi
Temperature higher than 50° C
All relay output will be turned off in all cases.
06/2016
BasicPlus
WT-DM Room Thermostats
2
Settings range
01: Manual
02: Advanced Programmable Timer
01: Only room temp.;
02: Room and floor temp.;
03: Only floor temp.
5-35° C (only for 01 and 02 in P02)
5-35° C (only for 01 and 02 in P02)
01: High temp. limitation;
02: Low temp. limitation (only for 02 in P02)
20-45° C (only for 02 in P02)
20-45° C (only for 03 in P02)
20-45° C (only for 03 in P02)
01: Enable; 02: Disable
5-17° C
01: 24 h; 02: 12 h
01: No display current temp.;
02: Display current temp.
1 to 64
00: 4800
01: 9600
00: No check
01: Odd check
02: Even check
Default
WT-DM
NA
01
30° C
5° C
01
35° C
35° C
20° C
01
5° C
NA
01
01
00
01
Danfoss Floor Heating Hydronics
3