Danfoss DEVIreg 130 Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Термостат Danfoss DEVIreg 130. Danfoss DEVIreg 130 16 страниц.

Dimensions

Weight

The product complies with the EN/IEC Standard "Automatic

electrical controls for household and similar use":

• EN/IEC 60730-1 (general)

• EN/IEC 60730-2-9 (thermostat)

1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off

before installation.

IMPORTANT: When the thermostat is used to control a

floor heating element in connection with a wooden floor or

similar material, always use a floor sensor and never set the

maximum floor temperature to more than 35 °C.

Please also note the following:

•

The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

•

The thermostat must be connected to a power supply

via an all-pole disconnection switch.

•

The sensor is to be considered as live voltage. Have

this in mind if the sensor must be extended.

Installation Guide

82 x 82 x 36 mm

90 g

DEVIreg™ 130