Danfoss DEVIreg 233 Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Термостат Danfoss DEVIreg 233. Danfoss DEVIreg 233 12 страниц.

Dimensions

Weight

The product complies with the EN/IEC Standard "Automatic

electrical controls for household and similar use":

• EN/IEC 60730-1 (general)

• EN/IEC 60730-2-9 (thermostat)

1�2

Safety Instructions

Make sure the mains supply to the thermostat is turned off

before installation.

IMPORTANT: When the thermostat is used to control a

floor heating element in connection with a wooden floor or

similar material, always use a floor sensor and never set the

maximum floor temperature to more than 35°C.

Please also note the following:

• The installation of the thermostat must be done by

an authorized and qualified installer according to

local regulations.

• The thermostat must be connected to a power sup-

ply via an all-pole disconnection switch.

• The sensor is to be considered as live voltage. Have

this in mind if the sensor must be extended.

• Always connect the thermostat to continuous

power supply.

71x 44 x 31mm

(in-wall depth: 20mm)

77 g

DEVIreg™ 233

Installation Guide