Casio 2696 Руководство по эксплуатации

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Смотреть Casio 2696. Casio 2696 9 страниц.

MA0311-EA

Power Saving

Power Saving causes the watch to automatically enter a sleep state to save power whenever the watch is left in the dark.

• Note that the watch may also enter the sleep state if the watch is blocked from light by your sleeve.

❚ How the sleep state works

• Display sleep state

The display sleep state is triggered whenever the watch is left in the

dark for about one hour between the hours of 10 p.m. and 6 a.m.

• The watch enters the display sleep state, which causes the

display to go blank. Alarms and the hourly time signal continue to

operate normally while the watch is in the display sleep state.

• The watch does not enter the sleep state if it is in the

Stopwatch Mode.

Module 2696

Module 2832

Power Saving

indicator

• The module number is engraved on the back cover of the

watch case.

• Function sleep state

The function sleep state is triggered whenever the watch is left

in the dark for six or seven days.

• The Power Saving indicator stops flashing and remains on the

display. Alarms and the hourly time signal are also disabled while the

watch is in the function sleep state. Time calibration signal reception

is not performed while the watch is in the function sleep state.

• Digital timekeeping functions continue to operate normally

in the function sleep state.

Modes and Display Screens

Timekeeping Mode

Module 2696

Battery Indicator

Receive Icon

(Light)

(Display switching)

Button

PM Indicator

(A indicated for

Hour, Minutes

AM times.)

Button

(Mode switching)

Month, Day

Seconds

Module 2832

Battery Indicator

Receive Icon

PM Indicator

Hour, Minutes

(A indicated for

AM times.)

Month, Day

Seconds

Operation Guide 2696/2832 ( B )

❚ To recover from the sleep state

Place the watch in an area that is well-lit, press any button, or

angle the watch toward your face to illuminate the display of the

watch using the Auto Light.

• It can take up to two seconds before display figures re-appear

after you place the watch in a well-lit area.

❚ To turn Power Saving on and off

Use the procedure under "Configuring Time and Date Settings

Manually" to turn Power Saving on or off.

• Power Saving is designed to conserve power when you do

not use the watch for a long time.

• To conserve power, the World Time that you can display on

the Timekeeping Mode stops while the watch is in a sleep

state. When the watch recovers from a sleep state, the

Timekeeping Mode World Time restarts from the time that it

stopped when the sleep state was entered. To correct the

World Time, change to the World Time mode and then

return to the Timekeeping Mode. Note that the Timekeeping

Mode World Time will not stop if Power Saving is turned off.

Days of the Week

SUN: Sunday

MON: Monday

TUE: Tuesday

WED: Wednesday

THU: Thursday

FRI: Friday

SAT: Saturday

To switch between display screens

Each press of the

button cycles through screens in the

sequence shown below.

• The World Time screen shows the current time, in 24-hour

format, of the city that is currently selected in the World

Time Mode.

Month Day

World Time

Day of the Week

(24-hour format)

• For information about the battery indicator, see "Battery

Indicator". For information about the receive icon, see

"Receive Icon".

• The actual appearance of your watch display depends on its module number.

•

All display examples shown here use Module 2832. The module number is engraved on the back cover of the watch.

World Time Mode

World Time

Mode Indicator

City Code

Stopwatch Mode

Time

Mode Indicator

Current Time

(24-hour format)

Alarm Mode

Alarm Time

Alarm Number

• The watch will automatically revert to the Timekeeping Mode

if you leave it in the Alarm Mode without performing any

operation for about two or three minutes.

• In the Stopwatch Mode, the current time is always displayed

using 24-hour format.