3T-Components 3T-MOTORS 3T45-20E Руководство по установке и эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Двигатель 3T-Components 3T-MOTORS 3T45-20E. 3T-Components 3T-MOTORS 3T45-20E 12 страниц. Shutter motors with obstacle detection and electronic limit switches
Печатать страницу
INSTALLATION NOTES
Do not expose the tubular motor to crushing, impact, falling or contact with any liquids.
•
Do not punch holes in the entire length of the tube (motor casing) or attach screws to it.
Please use suitable suspension springs to fasten the roller shutter curtain to the roller shutter shaft.
•
You will find suitable suspension springs in our store under mounting accessories.
Automatic Modus (Plug&Play):
•
Fixed shaft connectors and stoppers or angular end rails are
required to operate the motor in automatic mode!
Grinding marks of any kind on the motor casing will void the warranty.
•
The inspection cover of the roller shutter box must be easily accessible and removable.
•
The motor is designed for short-time operation (4 min). It has an internal thermal circuit breaker which interrupts the power supply in the event of overheating,
•
e.g. as a result of continuous operation. The cooling phase is min. 10 min, the thermal switch resets automatically. Regular operation is only possible after the
the motor has cooled down completely.
For proper obstacle detection, we recommend not to choose the tractive power of the motor too strong:
•
PVC shutter area
ALU shutter area
to 4m²
to 3,5m²
from 4m² to 8m²
from 3,5m² to 7m²
from 8m² to 12m²
from 7m² to 11m²
from 12m² to 16m²
from 11m² to 14m²
Before installation, all non-essential electrical wiring must be removed, all mechanisms
that are not necessary for motorized operation must be deactivated.
Motor type
3T45-10E
3T45-20E
3T45-30E
3T45-40E
oder
3T-MOTORS Tubular motors | Installation notes
5