Danfoss RA 2000 Информационный лист - Страница 6
Просмотреть онлайн или скачать pdf Информационный лист для Термостат Danfoss RA 2000. Danfoss RA 2000 9 страниц. One pipe steam thermostatic radiator
Также для Danfoss RA 2000: Руководство по установке (2 страниц), Инструкции по установке (4 страниц)
Печатать страницу
Data Sheet
Capacities
Use the following sizing charts
to select the correct valve for
the radiator in question.
Note:
As with any device which
imposes a pressure drop
system, noise may occur under
certain flow/pressure conditions.
To ensure quiet operation,
maximum pressure drop should
not exceed 40 to 45kPa.
Example
6
Radiator thermostats for one-pipe and two-pipe systems
RA-FN
for two-pipe systems
RA-G
for one-pipe systems
Capacity with P-band between 0.5K and 2K with RA 2000 sensor
Heat requirement:
2.05 kW
Temperature drop:
11°C
Differential pressure
across the radiator:
0.05 bar (5 kPa)
Solution:
Water flow through the radiator per hour:
Q =
2.05
= 0.044l/s
4.2 x11
VD.51.Q1.12 © Danfoss 10/2003
The P-band value depends on the chosen valve i.e.
RA-FN 15 will work with a P-band of 2K.
RA-FN 20 will work with a P-band of about 1.4K.
The Kv-value can also be calculated on the basis of
the formula
3
Kv
=
Q
Q(m
/h), p (bar)
p
0.044 =
0.044 x 3600 = 0.158 m
1000
Kv
=
0.158 = 0.71
0.05
Note: 1m
3
/h
3
/h = 0.278 l/s
DKCD