Danfoss RA 2000 Инструкции по установке - Страница 3

Просмотреть онлайн или скачать pdf Инструкции по установке для Термостат Danfoss RA 2000. Danfoss RA 2000 4 страницы. One pipe steam thermostatic radiator
Также для Danfoss RA 2000: Информационный лист (9 страниц), Руководство по установке (2 страниц)

Печатать страницу

Installation

Instructions

Installation:

1. With the heat source off, carefully remove

existing air vent from the radiator.

2. Carefully thread the valve body into the

radiator. Tighten the valve such that the

orientation of the air vent port is up.

The piping of an extension between the

radiator and valve body should not be done.

3. Tighten the air vent (013L8011) to the valve

body.

If using an air vent not supplied by Danfoss, it

must be a straight shank vent.

4. Mount the thermostatic operator to the

valve. Refer to the installation instructions

included with the thermostatic operator for

proper mounting to the valve.

RA2000 One Pipe Steam (1PS)

Thermostatic Radiator Valve

Valve Mounted Operator

Wall Mounted Operator