Danfoss TP7000 Series Инструкции по установке Инструкции по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Инструкции по установке Инструкции по эксплуатации для Термостат Danfoss TP7000 Series. Danfoss TP7000 Series 14 страниц. Electronic programmable room thermostat
Также для Danfoss TP7000 Series: Руководство пользователя (11 страниц), Руководство по установке (9 страниц)
Печатать страницу
- 1. Installation Instructions
- 2. Specification
- 3. Installation
- 4. DIL Switch Settings
- 5. Your Programmable Room Thermostat
- 6. Preset Programmes
- 7. Before You Start
- 8. Display Preferences
- 9. Setting the Clock & Day
- 10. Setting the OSC Period
- 11. Accepting the Preset Programmes
- 12. Before You Change the Preset Programmes
- 13. Programming in 7-Day Mode
- 14. To Convert to Thermostat Mode
- 15. To Programme Holiday Mode
- 16. User Overrides
Receiver Wiring (RF models only)
RX1 & RX2
NB. For mains voltage operated systems link terminal 2 to mains live supply
Commissioning (RF versions only)
To tune the RX receiver to the frequency of the thermostat
signal, follow steps 1-5 below
1. TP7000-RF
Press the recessed RESET button,
using a non-metallic object, to reset
the unit.
2. Press & hold the recessed LEARN button for 3 seconds,
using a non-metallic object.
NOTE: Thermostat now transmits continuously for 5 mins
3. RX1
Press and hold buttons PROG and CH1
for 3 seconds until green light fl ashes once
4. RX2 (if applicable)
Stat 1 - perform steps 1-3
Stat 2 - wait 5 mins, perform steps1-2 and then press
PROG and CH2 on RX2
RX3 (if applicable)
Stat 1 - perform steps 1 – 3
Stat 2 - wait 5 mins, perform steps 1-2 and then press
PROG and CH2 on RX3
Stat 3 - wait 5 mins, perform steps 1-2 and then press
PROG and CH3 on RX3
5. TP7000-RF
Press L or M to return the unit to
normal operation.
6
RX3
COM
RESET
LEARN