Danfoss TP7000-RF Инструкции по установке Инструкции по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Инструкции по установке Инструкции по эксплуатации для Термостат Danfoss TP7000-RF. Danfoss TP7000-RF 14 страниц. Electronic programmable room thermostat
Также для Danfoss TP7000-RF: Руководство по установке (9 страниц)

Печатать страницу
Danfoss TP7000-RF Инструкции по установке Инструкции по эксплуатации

Display preferences

Temperature display (°C or °F)
Press and hold DAY & COPY (for 2-3
seconds) until display changes.
Clock display (12 or 24 hr)
Press and hold NEXT & DAY (for 2-3
seconds) until display changes
(AM or PM will appear in 12 hr mode)
Setting the Clock & Day
Press PROG to begin programming
DAY - Press DAY until correct day is
shown (1=Monday, 2=Tuesday etc)
To change TIME
TIME - Press + and - to change time
To
(press and hold to change in 10 min
change
increments)
DAY

Setting the OSC Period,

if enabled (see pg.5)
This display will ONLY appear if the OSC
function has been enabled by your installer.
Use the + or - buttons to select the
OSC period. The choices are 0:30 (30
mins), 1:00 (1 hr), 1:30 and 2:00.
The recommended setting is 0:30. If set
to 0:00 the function is disabled.

Accepting the preset programmes

If you are happy to use the preset programmes on page 7,
you don't need to do anything else. To accept these settings
just close the front cover and after 2 minutes the pre-settings
will automatically be accepted.
8