Danfoss TP9000 Si Инструкции пользователя - Страница 2
Просмотреть онлайн или скачать pdf Инструкции пользователя для Термостат Danfoss TP9000 Si. Danfoss TP9000 Si 2 страницы.
Также для Danfoss TP9000 Si: Инструкции пользователя (2 страниц)
Печатать страницу
F. Programming your hot water - 5/2 day mode
Monday-Friday
•
A)Press the CH/HW button until the HW mode is selected
•
B) Press PROG until the first preset time is selected
•
C) Use + or – buttons to adjust the TIME (press and hold to change in 10 min
increments). (Fig 9)
•
D) Press NEXT to move to next preset time & temp (Event 2)
•
E) Repeat steps c and d for programming Events 3, 4, 5 & 6.
Saturday- Sunday
Press DAY/HOL to show 1st pre-set time (Event 1 Days Sat - Sun) (Fig 11)
Repeat steps b, c and d above to programme time and temperature events for
the weekend.
To return to normal operating mode press and hold PROG until screen returns to the current
time. (Fig 12)
G. Programming your hot water - 24 hour mode
CH/HW button until the HW mode is selected (Fig 8)
•
A)Press the
•
B) Press
PROG to show the 1st pre-set time (Event 1 )
•
C) Use
+ or – buttons to adjust the TIME (press and hold to change in 10 min
increments). (Fig 9)
•
D) Press
NEXT to move to next preset time (Event 2) (Fig 10)
•
E) Repeat steps
C and D for programming Events 3, 4, 5 & 6.
To return to normal operating mode press and hold PROG until screen returns to the current
time. (Fig 12)
H. Programming your hot water - 7 day mode
•
A)Press the CH/HW button until the HW mode is selected
•
B) Press PROG to show the 1st pre-set time (Event 1 Mon)
•
C) Use + or – buttons to adjust the TIME (press and hold to change in 10 min
increments). (Fig 9)
•
D) Press NEXT to move to next preset time(Event 2)
•
E) Repeat steps c and d for programming Events 3, 4, 5 & 6.
•
F) To select the next day, press DAY/HOL and repeat steps c, d, and e
•
G) Repeat process as necessary to complete programming for all 7 days
To return to normal operating mode press and hold PROG until screen returns to the current
time. (Fig 12)
I. Temporary User Overrides
Central Heating:
(ensure Central Heating mode is selected by using the CH/HW button)
•
Temporarily alter the current programmed temperature:
and V until the required temperature is selected. The unit will now maintain
this setting until the start of the next timed event at which point it will revert to
pre-programmed user settings. (Fig 13)
•
Temporarily override the current time period:
button will extend the current time/temperature period for 1,2 or 3 hours
depending on how many times it is pressed. At the end of the extended
period normal operation resumes. (Fig 13)
•
Frost Protection Mode:
Pressing Λ and V together puts the unit in frost
protection mode. A constant low temperature can be selected and this will be
maintained until Λ and V is pressed again to resume normal operation. (Fig 13)
Hot water:
Temporarily override the current time period: Pressing the +HRS BOOST button will
extend the current time period for 1,2 or 3 hours depending on how many times it is
pressed. At the end of the extended period normal operation resumes.
IMPORTANT TO THE INSTALLER
Installers: please ensure that you have amended the remote sensor setting to
value 0 (no remote sensor). Please refer to Option 90 of the Installer Advanced
Programming (page 15) in the installation instructions.
(Fig 8a)
(Fig 8b)
(Fig 10)
(Fig 8)
(Fig 10)
Simply press Λ
Pressing the +HRS BOOST
Danfoss Randall Ltd
Ampthill Road
Bedford, MK42 9ER
Tel: 0845 1217 400
Fax: 0845 1217 515
Email: [email protected]
Website: www.danfoss-randall.co.uk
Fig. 8
(a)
Fig. 9
Fig. 10
Fig. 11
(Fig 11)
Fig. 12
Fig. 13
+hour boost
buttons
(b)
Temperature
adjust buttons
Part No. V1 02/09