Dunham & Morrow DML2000 Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Dunham & Morrow DML2000. Dunham & Morrow DML2000 13 страниц. Magnetic locator

Introduction

The state-of-the-art DML2000-XR Magnetic Locator packs all of its sophisticated electronics
into a nicely balanced, water resistant package weighing less than 2 pounds. O-rings are used
to shock mount the sensors and thus ensure proper instrument operation. The electronics'
housing is water resistant and unaffected by rain and snow; the sensor tube is waterproof and
can be submerged in shallow water up to 3 feet.
The unit has six sensitivity settings for better control. Normal locates are performed on setting
two or three. Lower settings may be used for large, relatively shallow targets; higher settings
work best for weak or deep targets. The instrument audio output idles at a nominal 20 Hz when
no magnetic objects are present and increases whenever the DML2000-XR approaches a
magnetized object.*
The DML2000-XR Magnetic Locator is the ideal instrument for locating survey markers, septic
tanks, buried iron or steel pipes, water valves, water meters and any other ferrous objects
covered by dirt, pavement, water, snow or ice. The capabilities of this instrument are unlimited,
and an experienced operator will find many uses for the DML2000.
The separate Power/Volume and Sensitivity controls allow the operator to leave the Sensitivity
control in a favorite or preset position, deactivate the instrument and later resume operation
with this setting unchanged.
There is no need to worry about the instrument battery level. A built-in Low Battery indicator
begins flashing whenever the operator has 2 to 3 hours of normal operation remaining.
Typically the DML2000-XR will provide over 60 hours of operation from a set of 4-AA, alkaline
batteries. Using lithium batteries can increase this to over 100 hours of operation.
*BEWARE! A strong warble output from the instrument means you are probably over an
energized power line; a weak warble output often indicates the presence of a telephone or
communications cable.