Dunham-Bush System LST Руководство по установке
Просмотреть онлайн или скачать pdf Руководство по установке для Кондиционер Dunham-Bush System LST. Dunham-Bush System LST 16 страниц.
Печатать страницуSystem LST
Low Surface Temperature Natural Convector
Installation Instructions
Dunham-Bush Ltd, Downley Road, Havant, Hants PO9 2JD
Tel. 023 9247 7700
(Global) www.dunham-bush.com
(UK) www.dunham-bush.co.uk
NOTE: PLEASE LEAVE COPIES OF THESE INSTRUCTIONS AND ANY DRAWINGS WITH THE END USER.
INTRODUCTION
This booklet provides guidance for the site activities necessary to identify, handle, install, commission and service
Dunham-Bush System LST Low Surface Temperature Natural Convector.
The instructions refer to the standard product only: please refer to any additional drawings supplied for details of
any special features. Please study all documentation carefully before commencing installation work.
IDENTIFICATION
Refer to diagrams for exploded views and identification of the main parts. Any reference given on the order will be
marked on the casing, back plate and emitter packages for site identification.
DESCRIPTION
Each System LST natural convector consists of a back plate, emitter and casing components as shown in the
Diagrams.
Lock shield valves and TRV kits are optional accessories.
HANDLING
Casings, back plates and emitters are usually packed separately. Small orders may be packed in boxes and can
usually be off-loaded by hand. Larger orders are usually palletised and lifting equipment should be provided by the
buyer. Care should be taken when handling to avoid damage.
STORAGE
System LST components should be stored under dry, clean conditions. Any protective packing should not be
removed until the components are required for installation, unless damage in transit is suspected. (Note: The buyer
must examine the goods promptly upon arrival and is not entitled to make any claim against the Company in
respect of damaged goods, unless at the time of delivery the 'delivery note' is endorsed by the buyer and
countersigned by the carrier or shipping agent with a note detailing the damage).
PREPARATION
A sound, flat, vertical surface is necessary. The screws fixing the casing to the vertical surface are integral to the
structure of the casing hence suitable screws and if necessary, wall plugs must be provided by others, for fixing
back plates to the vertical surface.
Any obstructions or hazards within the wall such as live electrical cables and pipework must first be identified before
installation commences.
INSTALLATION
Before commencing any work identify the correct LST radiator for the location. If a radiator reference was given on
the order this will be marked on the packages for site identification.
WARNING
Some internal components have sharp edges. Care must be taken when installing this product and it is
recommended that protective gloves are worn.
Fax. 023 9245 3601
Document Ref:
105-000-001-D
Date : February 2016
Page 1 of 16