DUNLOP CRYBABY DCR-2SR Руководство - Страница 2

Просмотреть онлайн или скачать pdf Руководство для Музыкальная педаль DUNLOP CRYBABY DCR-2SR. DUNLOP CRYBABY DCR-2SR 2 страницы.

FRONT PANEL

Volume switch selects optional volume pedal control

Wah switch engages wah effect

Six-position Range knob selects frequency range for wah effect

Q Control adjusts the frequency breadth of effect, from narrow and sharp to broad and subtle

Boost knob sets preset volume boost, up to +10dB

EQ switch selects 6-band EQ with each knob delivering +/-15 dB

BACK PANEL

Ground Lift switch

Remote On/Off switch jack

Control Pedal Input jacks

Output jack connects to amplifier

Wah Thru jack passes dry, uneffected signal

Input jack connects to guitar

Control Pedal, Input, and Output jacks for optional volume pedal

TROUBLESHOOTING

Problem: No sound is produced.

Solution: Check to see that all the connections have been properly made and

that the

DCR-2SR

being used, make sure the pedal is in the toe-down position.

Problem: I hear dry guitar, but no wah effect.

C U S T O M S H O P

Solution: Make sure the proper connections have been made and that a

DCR-1SR Foot Controller is plugged into Control Pedal Input 1. Next, make

sure that the Wah button on the front panel is depressed. Also, make sure the

toe switch of the Foot Controller is activated with a click when you step on

the pedal—newer pedals can take a little extra pressure to engage.

Problem: The EQ doesn't seem to be doing anything.

FRONT PANEL

Solution: Make sure the EQ button on the front panel is depressed.

Problem: There is a lot of noise when I turn the Wah on.

Solution: Back off on the Boost and EQ settings. Extreme settings will add a

tremendous amount of gain and raise the noise floor.

POWER

The

DCR-2SR

20-volt DC regulated AC adapter. Plug polarity is positive on the barrel and

negative on the center. Note: An AC adapter must be used to operate the

BACK PANEL

DCR-2SR.

*ECB007UK (United Kingdom)

*ECB007EU (Europe)

*ECB007AU (Australia)

is powered up and turned on. If optional Volume pedal is