Dunster House ADAM III H4-2424ASH Руководство по установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке для Садовые домики Dunster House ADAM III H4-2424ASH. Dunster House ADAM III H4-2424ASH 15 страниц. Shed-2.4m x 2.4m(8ft x 8ft)

Печатать страницу
STEP 2: FLOOR
Items:
8x
ST-PT35352200 (Bearer)
1x
MFP - 2200x1220x10
1x
MFP - 2200x1080x10
48x 35mm SCREW (6/Bearer)
6x
50mm SCREW
Bearer layout (1.0)
MFP - 2200x1220x10
360
360
STEP 3: PANELS
Items:
1x
PANEL CC - 2200x2134 (REAR PANEL)
1x
PANEL DC - 2200x2134 (FRONT PANEL)
1x
PANEL AH + AI- 2300x1897 (SIDE PANEL WITH WINDOW)
1x
PANEL BG + BM - 2300x1897 (SIDE PANEL WITHOUT WWINDOW)
4x
ST-PT35351875
6x
90mm SCREW
46x 50mm SCREW
Principle of panels installation 1.0
FRONT PANEL
90mm SCREW
50m SCREW
Assembly Steps
Pre-drill parts before fixing with screws
2a) Ensure the base is level. Space bearers at the
specified distance as shown in the the diagram below
(1.0). If the bearer layout consists of double bearers, use
50mm screws to secure them as shown in the image to
the right (1.1).
2b) Secure the MFP to the bearers with 35mm screws all
equally spaced. There should be a 70mm space between
the ends of the bearer and the screw.
MFP - 2200x1080x10
360
315
315
310
2300
Pre-drill parts before fixing with screws
50mm SCREW
Principle of floor board(s) installation
Use 35mm screws. Keep equal distance between
screws. Use same amount of screws per each
bearer.
ST-PT35352200
FRONT
ST-PT35351875
SIDE PANEL
Joining double bearer (1.1)
Use 50mm screws.
50mm SCREW
Approx. 70mm
3a) Position front panel as shown in the
diagram below. Use 3x 90mm screws per
each side (not in the doorway) to secure
the front panel to the bearer. Use 3x
50mm screws to secure the panel to the
bearers (in the doorway).
3b) Use 4x equally spaced screws to
secure ST-PT35351875 to the front panel.
Refer to image on the left.
3c) Position side panel as shown and use
1x 50mm per each bearer to secure it to
the floor.
3d) Use 4x 50mm screws spaced
approximately 500mm apart to secure the
side panel to the front panel.
3e) Repeat these steps for all remaining
panels except the rear panel. Use 6x
50mm screws all equally spaced for the
rear panel
Double
Bearer
35mm SCREW
Page 8