Dunster House PS604 Руководство по установке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по установке для Игровые наборы и оборудование для детских площадок Dunster House PS604. Dunster House PS604 10 страниц. Monkey bars
Печатать страницуStep 2 - required components
4 of C40138B - 86x43x2225
2225
2x
C40138B - 86x43x2225
Step 3 - required components
2 of Ladders (Step 2)
A
A
Pre-drill all screw holes with a 3mm drill bit.
Assembly Instructions for Monkey Bars
C40138B - 86x43x2225
direction - grooves on the rungs
1 of Monkey bar (Step 1)
260 approx.
A
8 of C4038A - 44x44x550 - rungs
43
550
Lay the items on the ground first and position the
components before fixing. Make sure the grooves on the
rungs are facing the same direction as depicted. Fix
components together using 4x50mm countersunk screws.
Drive them through (as shown in Figure 2) from the top and
bottom of the side parts (C40138B) into the rungs.
When pre-drilling, do not drill through the rungs.
4x50mm countersunk screw
C4038A - 44x44x550 - rungs (x4)
4 of M10 100 coach bolt, square shoulder
8 of M10x20mm washers
4 of M10 Nuts
4 of Green 10mm caps
4 of Claw washers
155 approx.
A
M10 100 coach bolt, square shoulder
M10 nuts
Green 10mm
cap (top)
M10x20mm washers
Green 10mm
cap (base)
M10x20mm washers
countersunk screws
4x50mm countersunk screw
Ensure that the monkey bar is attached to
the ladders the correct way round, as shown
Claw washers
32 of 4x50mm
Figure 2
10
Rung
10
on the left.
A
Page 5