Free The Tone Arc-53m Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Оборудование для звукозаписи Free The Tone Arc-53m. Free The Tone Arc-53m 16 страниц. Audio routing controller

Печатать страницу

1) To use as an effect loop

If the four loops (L1–L4) are not enough for your application, the separate loop can be used as an additional effect loop. Connect your signal to

the Input (IN-5) jack and connect the Send (S-5) jack to your effector's input. Connect the effector's output to the Return (R-5) jack, then the

Output (OUT-5) jack to the downstream device.

Input

2) To use as an output selector

The separate loop can be used as an output selector to choose one of the two outputs. If the loop is turned on and output 1 is selected, out-

put 2 is muted to prevent crosstalk or noise. Conversely if the loop is turned off and output 2 is selected, output 1 is muted. Feed to the Input

(IN-5) jack and connect to the input of your ampliﬁer, etc. from the Send (S-5) jack. Leave the Return (R-5) jack unconnected. Connect the

Output (OUT-5) jack to the input of another ampliﬁer, etc.

Input

Output 1

(AMP 1)

3) To use as an input selector

The separate loop can be used as an input selector to choose one of the two inputs. By turning on the loop, input 2 signal connected to the

Return jack appears at the Output (OUT-5) jack. By turning off the loop, input 1 signal connected to the Input (IN-5) jack appears at the Output

(OUT-5) jack. Leave the Send (S-5) jack unconnected.

Input 1

(GTR/BASS)

HOW TO USE SEPARATE LOOP

Effector

Output

Output 2

(AMP 2)

Input 2

Output

(GTR/BASS)

Signal flow when the Loop is ON

Signal flow when the Loop is OFF

Signal flow when the Loop is ON

Signal flow when the Loop is OFF

Signal flow when the Loop is ON

Signal flow when the Loop is OFF