Free The Tone COSMIC WAVE Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальная педаль Free The Tone COSMIC WAVE. Free The Tone COSMIC WAVE 10 страниц. Multiple filtering delay

Печатать страницу

Welcome to the world of COSMIC WAVE!

COSMIC WAVE is a compact, but epoch-making digital delay with multiple filter functions. This unit's tone filter

can process the delay sound to have a rich tone or conversely adjust it to be far from the original sound. The

proprietary Cosmic filter creates an effect sound reminiscent of outer space, adding a new color to your delay

sounds. We added new functions such as bit adjustment in which the number of output bits of the delay sound

can be set in 1-bit units, from smooth and high-quality 24-bit to rough 8-bit sound that contains distorted noise.

Enjoy the world of COSMIC WAVE with attractive new features.

Cosmic Filter and Multiple Filtering

Cosmic filter has an effect that gradually converges over time to the selected frequency band by applying our

unique filtering process to delay sound. By setting the feedback amount more than usual, you can keep the

delay sound ringing while creating sound changes by the Cosmic filter.

This unit can use its filter and equalizer simultaneously. The band-pass filter can limit the bandwidth of delay

sound. Adjusting the bandwidth of the output drastically changes the sound when the original and delay sounds

are mixed. There is no limit in delay sound variations achieved by the combination of this band-pass filter and

3-band equalizer, as well as the TONE control inserted in the delay's feedback loop.

Factory Presets

The COSMIC WAVE is shipped with factory presets. They are stored in the user preset memory after No. 128

with the [ F: ] preset number prefix. Users can turn the DELAY TIME (PARAM) encoder to select and recall the

desired factory preset.

Note that this factory preset area is protected against recall, write, or delete operation via MIDI signals.

Note that the parameters of the factory presets have already been copied into the user preset area to be used

after being edited to the user's preference.

For more details about the factory presets, please refer to the product page on our website.

How to Recall Presets

This unit provides 128 presets that can be recalled in several ways.

Switching between Presets 1 and 2 by TAP Footswitch

To switch between Presets 1 and 2, press the TAP footswitch for 0.5 seconds.

NOTE

If the TAP footswitch has been set to [PS 1-2] in the Global Setup screen, these two presets switch instantly at the

moment when the footswitch is pressed.

Switching to Desired Preset from 128 Presets

1. Press the HOME switch to show the HOME screen in which a preset number and preset name are displayed.

2. Turn the DELAY TIME (PARAM) encoder until the desired preset number is shown on the display. The two red

LEDs above the TAP footswitch flash alternately. Note that the preset is not recalled at this point.

3. Press the TAP footswitch to confirm the recalling operation of the preset. After confirmation, the two red LEDs

stop flashing.

Recalling Preset via MIDI Signal

This unit's presets can be switched by receiving a MIDI signal containing a program change number from an

external MIDI device. The MIDI channel of the device that sends program change numbers must be the same as

that of the MIDI channel of the COSMIC WAVE.

How to Edit Parameter Setting and Save to Preset

1. Press the SAVE switch. The SAVE LED and the preset number display start flashing.

2. Turn the DELAY TIME (PARAM) encoder until the display shows the desired preset number to which the

edited setting should be stored.

3. Press the SAVE switch to save the edited parameter in the preset.

NOTE

To cancel the save operation in the middle, press any of the HOME switch or the cursor ◀/▶ key other than the

SAVE switch while the number shown in the display is flashing.

If a parameter of any stored preset is changed, a dot appears at the lower right side of the preset number's first

digit. When the edited parameter is saved to the preset, this dot disappears.