AudioCodes MP-100 Краткое руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Шлюз AudioCodes MP-100. AudioCodes MP-100 17 страниц.

AudioCodes™ MP-100/104 Gateway Quick Start Installation Guide

Copy the following files that you just unzipped and paste them into the BootP server

folder (under C:\Program Files\AudioCodes).

NOTE:

The file names may be different depending on the version and date that the

files are created.

•

BOOT file (e.g., ramMP10XFXO.cmp) — Contains a compressed, downloadable

software image file.

•

INI file (e.g., MP1XXFXP_IT.ini) — Contains the default settings for the MP-

104.

•

Coefficient file (e.g., MP1XX12-1-12khz-fxo.dat) — Contains a set of

parameters for the signal processor of the loop interface devices.

•

Call Progress Tone file (e.g., call_progress_usa/uk.dat) — Contains the

definitions of the call progress tones that the MP-104 will detect/generate.

NOTE:

The _usa files are for US systems, and the_uk files are for European sys-

tems.

Open the MP1XXFXO_IT.ini file by using a word processor, such as Notepad,

Microsoft

Word, etc. Add the IPRC IP address in the CallAgentIP field, as shown

below, and save and close the file as .ini file.

NOTE:

Programming the IPRC IP address in the .ini file provides a more reliable

Call Agent ID setting for the MP-104, when files are loaded via the TFTP server. If not

modified in the .ini file, this value is overwritten every time the MP-104 files are

reloaded during a reset, using the value in this file. This .ini file is "read only" by

default, therefore, you must modify this characteristic to allow updating. To change the

attributes, right-click the file name in the Windows Explorer and open Properties.

Uncheck Read-only in the Attributes field and click OK.

Call Agent IP

March 2004

Page 5 of 17