freecam C310 Руководство пользователя

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности freecam C310. freecam C310 2 страницы. Solar powered wifi camera
Также для freecam C310: Руководство пользователя (2 страниц)

Печатать страницу

C310 Solar Intelligent WiFi Camera

User Manual V2.4

Shenzhen Leshi Video Technology Co., Ltd.

www.lsvt.com.cn

www.freecamglobal.com

1.4.3 Android system – add equipment

1.4.3.1 For Android mobile phone, on [Nearby Equipment] page, Select the

adding device ID. (e.g. DOGXXX)

1.4.3.2 Enter [Setting WiFi] interface, select the wireless network to be

connected to, enter router's password, and then click on "Next".

1.4.3.3 Added successfully.

1.4.3.4 The WiFi status indicator blinks red over 1 minute, means it may be

a wrong password to enter a router, or bad WiFi notwork condition.

WiFi Reconfigure

When the password is wrong, or your network changes,

you can refigure WiFi as shown below:

Please turn on the camera and wait the WiFi status

indicator light on, then press the WiFi reset button for 3-5

Notice

seconds till the WiFi status indicator has blinks blue, and

add camera by APP again (see Fig.1.4.2).

C310 is a smart WiFi camera that can operate for a long time with only

solar power supply.

· C310 only works under PIR alarm triggered or APP remote to wake

up, usually it keeps online in deep sleep mode with low power

consumption;

· When an object enters the warning area of C310, it can automatically

wake up the camera, and push pictures to notify users;

· C310 can wake up quickly anywhere by mobile phone and view live

video；

· Automatic recording after wake up;

· Infrared LED can supply light at night;

· In most area of the world, C310 can operate long time under normal

sunlight.

Appearance Illustration

Prior to installation of this equipment, please carefully read all operation

and installation instructions, and operate according to these instructions.

⑤

③

⑥

⑦

⑧

①

⑨

④

②

⑩

①

Infrared light

②

Photosensitive device

③

PIR sensor

④

Lens

⑤

Antenna

⑥

Solar charge panel

⑦

WiFi reset button

⑧

Charging socket

⑨

Power supply switch

⑩

Mounting base bracket

Power indicator

WiFi status indicator

1.4.4 IOS system – add equipment:

IPhone: open the system's "Setting" -> "WLAN", select "DOG-******" to

connect it, and the password is eight 1. Then go back to the client, and

click on "Next".

1.5 Video view

1.5.1 Click on the equipment number in the list on the [Home] page, enter

"Camera Video View" page, and click on "

" to enter the [Living

Broadcasting Page].

Indicator Light Status

Indicator light status

Status

Solution

Yellow Power

Charging

indicator on

Yellonw Power

Charge complete

indicator on and go out

WiFi indicator

Waiting for connecting

blinks blue

If it blinks over 1 minute

and still can't connect

WiFi indicator

Connecting to WiFi

success, please reset

blinks red

device and check the

router's WiFi

Normal working or

WiFi indicator off

power off

Installation Instructions

1 Install mobile client software

1.1 Equipment power-on

Before use, please connect the charging cable to the matching DC5V / 1A

mobile phone charger to charge the equipment. For first time to charge the

device, it should be charged at least six hours. The equipment can be

powered off once it finishes charging.

1.2 Install mobile client software

APP name: Doby

Scan the following QR code, then download

and install it.

If you need PC client software, please download

at Download center from LSVT official website.

1.5.2 Menu bar:

Camera: Capture the current live broadcasting screen and save it to

the equipment album.

Voice: Click on the horn button to hear the voice from camera;

This model doesn't support such function;

Full screen: Click on it to display in landscape mode;

Protection: After enabling the "Motion Detection" function, when the

screen of the environment on the camera end changes, the changed

picture will be captured, and such information will be sent to mobile

phone client(see Fig. 1.5.2).

It includes motion detection (ON/OFF), sensitivity (namely, PIR

detection sensitivity, which can be adjusted to be low, medium and

high according to the requirements, this not supported in current

version), and alarm time period(set the alarm time period) and so on.

Historical video: View the historical video saved in SD card;

Intimate share: Share the video with your relatives and friends who

have registered account, and then your relatives and friends can

view your video images. (Such equipment doesn't support viewing by

multiple persons at the same time. Only one user can view at any

moment).

1.5.3

Setting（see Fig.1.5.3）:

• Equipment name: You can give the equipment a nice name.

• WiFi configuration: It's not currently supported.

• Equipment information: View the information status of the equipment.

• Video recording: Select "When error is detected" or "Never".

• SD card: View the status of SD card of the equipment.

• Video direction: There are two options of "Default (forward direction)" and

"Invert (Rotate for 180°)".

• Time zone of equipment: When the equipment is initially activated, it uses

local time zone,If needs to be changed, click to setup.

• Equipment indicator light: This model is not supported.

1.3 Register and log in

Open the client software, click on [Sign Up], and register a new account

number, and operate according to the prompted steps: if you already have

an account, click on [Sign In] directly.

1.4 Add equipment

1.4.1 After registering and logging in successfully, enter [Home], click on

" in the lower right corner, and select "Camera":

1.4.2 Please place the camera where there is strong WiFi signal, then turn

on the camera's power switch (see the Page1) to check if the device WiFi

light is blinking blue. If blue light flashes, then click on "Yes" to enter the

WiFi configuration interface; if not, please keep press the WiFi button for

3-5 seconds, and wait until the WiFi indicator flashes blue, then click on

the "Yes" to enter WiFi configuration page;

1.5.4 PIR detection

If moving objects are detected within 5 meters by device, motion detection

will be triggered and alarm notification pushed to mobile phone APP (refer

to Figure 1.5.4a). A screenshot will be sent with recorded video about 30

seconds once alerts occur (Whether WiFi is connected or not, video will be

recorded).

Notice: Please check if the phone's lock screen notification for the

APP has been turned on. There have some different ways for different

phones to set up (refer to Figure 1.5.4b).

home

Fig. 1.5.2

Fig. 1.5.3

Fig. 1.5.4a

Fig. 1.5.4b