freecam C330 Руководство по быстрой настройке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Камера безопасности freecam C330. freecam C330 2 страницы.
Печатать страницу
1. Content & Parts
1. Please make sure all parts are included.
• WiFi Camera with built-in battery
• Mounting Wall Bracket
• 3 x wall screws & 3 x expansion screw set
• USB Cable & Power Adapter
• 1 x mounting screw &
1 x plastic gasket
Parts & Description
3. Bracket Assembly
3.1. Insert the clear
plastic washer into
camera mounting screw.
3.2. Set the mounting
screw into bracket.
3.3. Tighten the mounting
screw and adjust bracket
angle to finish bracket
assembly
3.4. If necessary, peel off
the sticker from bottom
of the mounting bracket
to stabilize the camera.
For more detailed instruction, Visit our support site For video demonstration. www.solocameras.com.
For tech support, email us at
C330 Installation Guide
2. Charging Camera
2. Fully charge your camera before use.
• Connect the power cable to camera.
• For initial charging, the camera must be
fully charged which takes about 4 hours.
• Turn on the power switch.
• The yellow LED light will be on to indicate
that the battery is charged.
4. Wall Mount Installation
4.1. Drill holes on the
wall and insert green
expansion screws into
the holes.
4.2. Remove screw
cover and unscrew to
detach the camera
mounting base.
4.3. Align the holes of
the mounting bracket
with the expansion
screws and secure the
bracket.
4.4. Screw back the
camera base. Adjust
bracket angle to a
desired position.
Or, call 201-934-1654.
2