AudioCodes Mediant 2600 Руководство по быстрой настройке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Контроллер AudioCodes Mediant 2600. AudioCodes Mediant 2600 8 страниц. Session border controller

Печатать страницу

1. Assigning an Ip Address

Safety Precautions

This device is an indoor unit and therefore, must not be installed outdoors. Ethernet cabling must be



routed only indoors and must not exit the building.

The device must be installed and serviced only by qualified service personnel.



Do not open or dismantle the device.



Do not expose the device to water or moisture.



Make sure the device is installed in a well-ventilated location to avoid over heating of internal



components and subsequent damage.

Do not place any object on top of the device and make sure that sufficient clearance from the top and



sides are maintained to ensure proper airflow to avoid over heating of internal components. The side

panels of the chassis where the air vents are located must remain unobstructed to ensure adequate

airflow and prevent overheating of the chassis components.

Operate the device in an ambient temperature (Tma) that does not exceed 40°C (104°F).



The device must be installed only in restricted access locations.



Use only the supplied AC power cord for connection to the power source.



The device must be connected to an electrical socket-outlet providing a protective earthing connection.



Operate the device only from the type of power source indicated on the chassis.



Installation of the device must be in accordance with national wiring codes and conform to local



regulations.

The device must be installed only in telecommunication sites in compliance with ETS 300-253



requirements "Earthing and Bonding of Telecommunication Equipment in Telecommunication

Centers".

7 |

P a g e